|
Viewing 1 to (7 Total) Technics KN6000 - Blank Screen, Unboot ? |
Portugal
Total Posts: 1
Joined: April 14, 2016
|
Hi everybody. I own a Technics KN6000 and from one moment to another my keyboard powers on but the screen is all blank, nothing appears at all.
Could be a OS problem, not booting, or the HD-SX3 ?
how can i reset the keyboard and re-install the OS again? Where can I get the files?
Re-install is made by midi sysEx or by floppy disk? (please take in count that when I power the keyboard on, nothing appears on the screen, only grey color)
thank you
Tags:
KN6000, Display, Screen, Blank, Not Boot, Unbooting, OS
Posted on April 14, 2016 at 2:54 AM
|
|
|
United Kingdom
Total Posts: 26
Joined: December 11, 2014
|
Re: Technics KN6000 - Blank Screen, Unboot ?
Hi there, I am having a similar problem...Did you manage to sort out yours? What did you do?
Cheers
Posted on June 16, 2016 at 6:50 AM
|
United Kingdom
Total Posts: 1055
Joined: February 2, 2014
|
Re: Technics KN6000 - Blank Screen, Unboot ?
Hi Rosi,
Please see the following post:
http://technicskn7000.com/kn7000-forums/technics-keyboards-repairs/...
Regards,
Mike
Posted on June 20, 2016 at 11:18 PM
|
Portugal
Total Posts: 5
Joined: July 17, 2018
|
Re: Technics KN6000 - Blank Screen, Unboot ?
Hi !
So the solution of this issue is to make one from 2 KN6000 keyboards changing their parts ?
Nice solution !
Posted on July 17, 2018 at 4:41 PM
|
United Kingdom
Total Posts: 26
Joined: December 11, 2014
|
Re: Technics KN6000 - Blank Screen, Unboot ?
Lol, yep, that was the only affordable solution. 
Posted on July 17, 2018 at 5:17 PM
|
Bosnia and Herzegovina
Total Posts: 2
Joined: October 17, 2018
|
Re: Technics KN6000 - Blank Screen, Unboot ?
Please,if you can help me,I need originala OS v5.0 for Technics kn 6000. I have installed new version7.1 but clavier doesn't raise (boost) the system. Mail..
[email protected]
thank you
Posted on October 26, 2018 at 5:55 PM
|
United Kingdom
Total Posts: 360
Joined: June 8, 2014
|
Re: Technics KN6000 - Blank Screen, Unboot ?
Re your request for information please see the item I posted in the KN600 forum:-
Dear Members,
Due to the number of inquires regarding problems with the upgrade Ver.7.1 (Download) We feel we must Post this note of Caution !!!!. You will note that we do NOT have the upgrades on the site.One reason being that the only copy of KN6000 upgrades we own are genuine Disks supplied with the SY-EW65NX Expansion kit to update KN6000 to KN6500 This is Ver.7.0 which was also supplied by Technics with any of the NX sound expansion boards Note our KN6000 was also supplied with Ver 7.0 from new.
Following advice from our friendly engineer Dave Tutt we explain our reasons below:-
1/Both the Keyboards and Disks are approx 18 years old. This means the disks have aged and possibly degraded over time and also your Disks Drive will be worn through normal usage and may not be as accurate as they were.
2/The way our keyboards are made is similar to a computer, However they differ in that they are not equipped with their own "BIOS" (Basic Input Output System) is the system used in PC's etc to load Operating systems to then let you configure your PC. They don't have one as they are dedicated musical instruments. So If during an upgrade there is an error/or damaged code you cannot go back and start over !!! To be very blunt about it you will render your Keyboard SCRAP !!! and leaving you in need of a replacement Main Board which are no longer available from Technics.
These are the reasons why this site does not have the upgrades to download as we cannot guarantee the downloads or the installation of them.
If you wish to proceed it is after all your keyboard but remember if it has worked without a problem until now there is no benefit in the upgrade. You might find after this time the upgrade only offered an obscure midi patch for a long time out of date program.
Regards John ADMIN TEAM.
Tags: Announcements, Technics Repairs, Technics instruments repairs
Posted on August 24, 2018 at 3:37 PM Edit | Delete | Promote to Page ee the comments from the KN6000 forum:-
Posted on October 29, 2018 at 3:40 PM
|
